CO2배양기 MCO-170AICUVD
작성자관리자
- 등록일 25-03-28
- 조회175회
- 분류
- 세포 및 조직 배양기
- 규격
- 770(W) x 730(D) x 905(H) mm 165 liters (79kg)
- 설명
- InCu-saFe와 SafeCell UV는 모두 오염을 방지하는 기능을 합니다.직접 가열 시스템과 멜라민 폼 단열재는 이중 IR 센서가 CO2 레벨을 제어하는 동안 챔버 전체에 최적의 온도 분포를 보장합니다.
본문
Spectifications
건열멸균 +UV Light 방식 CO2 배양기 Dry heat sterilisation + UV Light
IncuSafe MCO-170AICUVD CO2 인큐베이터는 CO2 농도를 정밀하게 제어하고 챔버 내에서 정확하고 균일하며 반응성이 높은 온도 제어를 제공합니다.
세포 배양 중에 inCu-saFe 살균 내부 및 SafeCell UV 램프는 오염을 방지하기 위해 지속적으로 작동합니다.
인큐베이터의 이중 열 살균은 11시간이 걸리는 180°C 살균 프로세스 동안 인큐베이터의 두 히터를 사용합니다.
낮은 열 방출로 인해 스택형 인큐베이터 내부의 온도에는 영향이 없으며 세포 배양은 중단 없이 계속될 수 있습니다.
| External Dimensions (W x D x H) | 620 x 755 x 905 mm |
|---|---|
| Internal Dimensions (W x D x H) | 490 x 523 x 665 mm |
| Volume | 165 liters |
| Net Weight | 79 kg |
| Temperature Control Range & Fluctuation | AT +5 ~ +50, ±0.1 °C |
| Temperature Uniformity | ±0.25 °C |
| CO2 Control Range & Fluctuation | 0 ~ 20, ±0.15 % |
| O2 Control Range & Fluctuation | - |
| Humidity Level & Fluctuation | 95, ±5 %RH |
| Sterilisation Method | Dry heat sterilisation, 180°C, 11 hours |
| Temperature Sensor | Thermistor |
| CO2 Sensor | Dual IR |
| O2 Sensor | - |
| Display | |
| Exterior Material | Painted Steel (rear cover not painted) |
| Interior Material | Stainless Steel Copper-Enriched Alloy |
| Insulation Material | Melamine resin foam |
| Heating Method | Heater jacket |
| Outer Doors | 1 |
| Outer Door Lock | Standard |
| Field Reversible Door | Included |
| Inner Doors | 1 |
| Shelves | |
| Shelf Dimensions (W x D x H) | 470 x 450 x 12 mm |
| Max. Load Per Shelf | 7 kg |
| Max. Shelf Capacity | 10 |
| Access Port | 1 |
| Access Port Position | Rear Upper Left |
| Access Port Diameter | 30 |
| Power Failure | R |
| Out of Temperature Setting | V-B-R |
| High Temperature | V-B-R |
| Out of CO2 Setting | V-B-R |
| Out of O2 Setting | - |
| Door Open | V-B |
| Power Supply | Local |
| Frequency | Local |
| Noise Level | 25 dB |
| UV system set | Standard |
Dimensions


![유어랩[YourLab]](http://hu7863.s33.hdweb.co.kr/sh_img/hd/top_menu/logo.png)
![유어랩[YourLab]](/sh_img/hd/top_menu/logo.png)